 |
 |
Gimbals
 |
 |
Gimbals
Gimbals' are a good choice if you are going to fish occasionally and would like to keep the equipment completely removable and stowed when not in use.
We do strongly suggest you look under the gunwale and make sure the flush mount you are using is securely bolted, we recommend a backing plate for heavy duty use.
Designed to work in conjunction with flush mounted rod holders. Our pre-drilled and tapped gimbal mounts allow easy installation of
your downrigger.
Our Traxstech 6" track can be mounted in two different directions, on the top plate of this gimbal to give a wider range of use; Such as a single rod holder, two, three or four rod holder tree's in vertical or horizontal options, our downrigger swivel base or anything else we offer.
* Hitch pin included
We do strongly suggest you look under the gunwale and make sure the flush mount you are using is securely bolted, we recommend a backing plate for heavy duty use.
Designed to work in conjunction with flush mounted rod holders. Our pre-drilled and tapped gimbal mounts allow easy installation of
your downrigger.
Our Traxstech 6" track can be mounted in two different directions, on the top plate of this gimbal to give a wider range of use; Such as a single rod holder, two, three or four rod holder tree's in vertical or horizontal options, our downrigger swivel base or anything else we offer.
* Hitch pin included
| Descripton | Part# | Price | Buy Me |
| 30 deg. Drilled Mount w/1-1/2" dia x 10-1/2" tube |
GM-100 | $65.99 USD |
 |
| 30 deg. Drilled Mount w/1-3/4" dia x 13-1/2" tube |
GM-100-175 | $89.99 USD |
|
| 90 deg drilled mount w/1-1/2" dia x 10-1/2" tube |
STGM-100 |
$69.99 USD |
|
| 90 deg drilled mount w/1-3/4" dia x 13-1/2" tube |
STGM-100-175 | $89.99 USD |
Gimbal with track
If the flush mount is pointed straight out the back (parallel with the gunwale) then the fixed position gimbal will work for you.
As always everything Traxstech makes will slide into and securely fasten in the track; rod holders, grill, cleat with bumper and tool/beverage holders are just a few of the great combinations for this unit.
GM-180
If the flush mount is pointed straight out the back (parallel with the gunwale) then the fixed position gimbal will work for you.
As always everything Traxstech makes will slide into and securely fasten in the track; rod holders, grill, cleat with bumper and tool/beverage holders are just a few of the great combinations for this unit.
GM-180| Description | Part # |
Price |
Buy Me |
| 30 deg. Mount w/ 18" track and 1-1/2" dia. x 10 1/2" tube |
GM-180 | $94.99 USD |
|
| 30 deg. Mount w/ 18" track and 1-3/4" dia. x 13 1/2" tube |
GM-180-175 | $124.99 USD |
|
Adjustable Gimbal
Most mid ship installed flush mounts are angled outward at some angle, none being the same. We developed this adjustable gimbal mount to allow you to drop the tube with its toothed top plate into the flush mount, line up the top mating plate and track down the gunwale and securely fasten together. This keeps everything inside the boat and will allow you to properly run dipsey divers, flat lines or planer board rods effectively.
| Description | Part # |
Price |
Buy Me |
| 30 deg mount 1-1/2" dia tube with 6" top track |
GMA-06 | $159.99 USD |
|
| 30 deg mount 1-1/2" dia tube with 12" top track |
GMA-120 | $169.99 USD |
|
| 30 deg mount 1-1/2" dia tube with 18" top track |
GMA-180 | $179.99 USD |
|
| 30 deg mount 1-1/2" dia tube with 24" top track |
GMA-240 | $199.99 USD |
|
| 30 deg mount 1-3/4" dia tube with 6" top track |
GMA-06-175 | $174.99 USD |
|
| 30 deg mount 1-3/4" dia tube with 12" top track |
GMA-120-175 | $184.99 USD |
|
| 30 deg mount 1-3/4" dia tube with 18" top track |
GMA-180-175 | $194.99 USD |
|
| 30 deg mount 1-3/4" dia tube with 24" top track |
GMA-240-175 | $214.99 USD |
|
