ANGLED GIMBAL MOUNT
Designed to work in conjunction with flush mounted rod holders. Our pre-drilled and tapped gimble mounts allow easy installation of Cannon, Big-Jon, Scotty, Vector, Walker and Penn downriggers.

Our Traxstech 6” track can also be mounted in two different directions, on the top plate of the gimbal to give a wider range of use. Such as a single rod holder, two, three or four rod holder tree’s in vertical or horizontal options, our downrigger swivel base or anything else we offer.

The uniqueness of adapting fishing equipment to a gimbal mount allows an easy installation. When not in use the gimbal can be removed to return the boat to its original condition.

  • Hitch pin included

Standard Clear Textured Finish

Description Part # Price  

30 deg. Drilled Mount
w/ 1 1/2" dia. x 10 1/2" tube

GM-100 $65.99 USD

30 deg. Drilled Mount
w/ 1 3/4" dia. x 13 1/2" tube

GM-100-175 $89.99 USD

Additional colors available in Titanium, & Black.
Please e-mail to check availability and pricing.

 

gimbal mounts

STRAIGHT GIMBAL MOUNT
This straight up and down gimble mount also accepts all the great mounting options as stated above(GM-100).

Gimbals’ are a good choice if you are only going to fish occasionally and would like to keep the equipment completely removable and stowed when not in use. We do strongly suggest to look under the gunwale and make sure the flush mount you are using is securely bolted, we do recommend a backing plate for heavy duty use.

Description Part # Price  

90 deg. Drilled Mount
w/ 1 1/2" dia. x 10 1/2" tube

STGM-100 $69.99 USD

25 deg. Drilled Mount
w/ 1 1/2" dia. x 10 1/2" tube

GM-100-25 $79.99 USD

Additional colors available in Titanium, & Black.
Please e-mail to check availability and pricing.

 


ANGLED GIMBAL WITH TRACK
If the flush mount is pointed straight out the back (parallel with the gunwale) then the fixed position gimbal will work for you. As always everything we make will slide into and securely fasten in the track. Rod holders, grill, cleat with bumper and tool/beverage holders are just a few of the great combinations for this unit.

Standard Clear Textured Finish

Description Part # Price  
30 deg. Mount w/ 18" track
and 1 1/2" dia. x 10 1/2" tube
GM-180 $94.99 USD

30 deg. Mount w/ 24" track
and 1 1/2" dia. x 10 1/2" tube

GM-240 $105.00 USD

30 deg. Mount w/ 18" track
and 1 3/4" dia. x 13 1/2" tube

GM-180-175 $124.99 USD

25 deg. Mount w/ 18" track
and 1 1/2" dia. x 10 1/2" tube

GM-180-25 $119.99 USD

Additional colors available in Titanium, & Black.
Please e-mail to check availability and pricing.

 


ADJUSTABLE GIMBLE MOUNT
Most midship installed flush mounts are angled outward at some angle, none being the same. We developed this adjustable gimble to allow you to drop the tube with its toothed top plate into the flush mount, line up the top mating plate and track down the gunwale and securely fasten together. This keeps everything inside the boat and will allow you to properly run dipsey divers, flat lines or planer board rods effectively. Available in a wide range of configurations to fit your needs.

Standard Clear Textured Finish

Description Part # Price  

30 deg. mount 1-1/2” dia tube with 6” top track

GMA-06 $159.99 USD

30 deg. mount 1-1/2” dia tube with 12” top track

GMA-120 $169.99 USD

30 deg. mount 1-1/2” dia tube with 18” top track

GMA-180 $179.99 USD

30 deg. mount 1-1/2” dia tube with 24” top track

GMA-240 $199.99 USD

30 deg. mount 1-3/4” dia tube with 6” top track

GMA-06-175 $174.99 USD
30 deg. mount 1-3/4” dia tube with 12” top track GMA-120-175 $184.99 USD
30 deg. mount 1-3/4” dia tube with 18” top track GMA-180-175 $194.99 USD
30 deg. mount 1-3/4” dia tube with 24” top track GMA-240-175 $214.99 USD

 


BUILT BY: myndSQUARE LLC