Part # ECMDP-108
8 Inch Dual Pivot Adjustable Electronics Mount
8-inch-tall overall height with the lift & turn base, 360-degree rotation every 18 degrees, 6 locking positions up & down in 90 degrees.
These two features are on the top and bottom of the mount so you have twice as many adjustments.
The base plate of the mount can be used with the thumb screws in the track as shown or you can use the four-corner drilled and countersunk holes and can be hard mounted.
The universal top plate is 2'' x 6'' pre-drilled and tapped to fit most u-shaped mounting brackets.
***An optional 3'' x 4'' subplate (ECMP-4) can be purchased to mount first to your boat and then this standard plate will mount to the subplate and allow easy removal by the four corner screws.
Jeff Miller of Traxstech goes over their dual pivot electronic mounts and shows just how many options you have when fitting your boat.
Lance Valentine - Why he uses Traxstech Marine Electronics Mounts
Matt Johnson explains using Traxstech products for the ultimate mounting system for your electronics.