Skip to content
Toggle mobile menu
elcome to the Traxstech Corporation Website, The Ultimate Fishing System.
Traxstech Product Catalog & Shopping
Traxstech Boat Layouts
Traxstech Dealer Locator
Traxstech Colleagues - Boat Manufacturers
Traxstech Colleagues - Charter Captains
Traxstech Colleagues - Fishing Shows and Magazines
Traxstech Colleagues - Team Traxstech
Connect with Traxstech
Traxstech Event Calendar
Traxstech Dealer Login
Traxstech Website Reviews
Traxstech Gift Cards - Buy Here
Nav Menu 2
Nav Menu 3
Nav Menu 4
Nav Menu 5
Nav Menu 6
Nav Menu 7
Nav Menu 8
GM-180 / 30 Degree Gimbal Mount with 1-1/2 Diameter Tube and 18 Inch Track
Stock Status: In Stock
Usually Ships in 1 to 2 Business Days
Part # GM-180
30 Degree Gimbal Mount with 1-1/2 Diameter Tube and 18 Inch Track
Designed to work in conjunction with flush-mounted rod holders.
Our pre-drilled and tapped gimbal Mount allow easy installation of Traxstech, Canon, Big John, Scotty, Vector, Walker and Penn brand downriggers.
Our Traxstech 6" track can also be mounted into different directions on the top plate of the gimbal to give a wider range of use.
Such as a single rod holder, two, three or four-rod holder trees in vertical or horizontal options, our downrigger swivel base or anything else we offer.
The uniqueness of adapting fishing equipment to a gimbal Mount allows an easy installation.
When not in use, the gimbal can be removed to return the boat to its original condition.
We do strongly suggest to look under the gun wall and make sure the flush-mount you are using is securely bolted,
we do recommend a backing plate for heavy-duty use.
Hitch pin included in all models.
If the flush mount is pointed straight out the back parallel with the gunwale, then the fixed position gimbal will work for you.
As always, everything we make will slide into and securely fasten in the track.
Rod holders, grill, a cleat with bumper and tool/beverage holders are just a few of the great combinations for this unit.
30 degree angled gimbal mount drilled and tapped.
1-1/2" diameter x 10-1/2" tube.
Proudly made in the USA!
All of our Traxstech products are made in the shop in Chesaning, Michigan USA!
Has our signature textured finish:
Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
Every aluminum part is anodized after our texturing process to provide the highest quality available.
Salt spray tested and proven.
Comes in 1 color option:
Clear / Silver
GM-100-175 / 30 Degree Gimbal Mount with 1-3/4 Diameter Tube
GM-100 / 30 Degree Gimbal Mount
AGM-175-24 / 30 Degree Adjustable Gimbal Mount with 1-3/4 Inch Diameter Tube with MT-24 on top.
GM-180-175 / 30 Degree Gimbal Mount with 1-3/4 Inch Diameter Tube and 18 Inch Track
STGM-100-175 / 90 Degree Straight Gimbal Mount with 1-3/4 Inch Diameter Tube
AGM-150-DB / 30 Degree Adjustable Gimbal Mount with 1-1/2 Inch Diameter Tube with plate for Trolling bar.
AGM-175-18 / 30 Degree Adjustable Gimbal Mount with 1-3/4 Inch Diameter Tube with MT-18 on top.
AGM-150-18 / 30 Degree Adjustable Gimbal Mount with 1-1/2 Inch Diameter Tube with MT-18 on top.
Share your knowledge of this product.
Be the first to write a review »
Browse for more products in the same category as this item: