Part # VBT-2
Traxstech Vertical Tree with 2 Rod Holders
This slides into our Traxstech mounting track system.
If you use in-line planer boards for lead core, copper line or just long lining this is the ultimate rod holder system for you.
Our exclusive post design allows independent rod holder adjust-ability.
Each holder has six available positions in a 90-degree area for maximum spread of rod tips, allowing easier turns virtually tangle free.
The concept of the vertical tree mounted as far forward as possible allows full gunwale for the board rods, divers, and corner downriggers, keeping the transom completely open for netting and resetting baits.
We have also used this vertical tree in situations where space is limited and the top holders were used for boards and the bottom one for a diver rod.
**Track not included**
**Have you had an accident and damaged your VBT-2 post? We have a replacement post for sale Check out part #VBT-125**
****We also sell replacement rod holders for the VBT's check out part # VBT-10****
******Additional items we sell that will work with the VBT's are our vertical beverage holder part # BH-100V and vertical planar board caddies Part # PBCV-3 and PBCV-4*******
Lance Valentine explains Traxstech Vertical Bird Trees and their advantages.
Jeff Miller explains a Vertical Tree Net Holder Option with the VBT-10
- Proudly made in the USA!
All of our Traxstech products are made in the shop in Chesaning, Michigan USA!
Has our signature textured finish:
- Adds durability to the aluminum components, hardens your wear surface, no bright reflection, easy to clean.
- Every aluminum part is anodized after our texturing process to provide the highest quality available.
- Salt spray tested and proven.
The VBT-2 is from the bottom of the post to the top of it about 16” and has 2 VBT-10 rod holders on it.
Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.
Comes in 3 color options:- Clear / Silver
- Black
- Titanium
How tall are Traxstech vertical aluminum trees?
The VBT-2 is from bottom of the post to the top of it about 16”
Keep in mind that if you have the top rod holder in an upright position at the top you need to add another 10 inches or so to that height.
I had an accident with my VBT-2 and bent the post. Do I have to buy a brand new VBT-2? or can I buy just the post?
We know that accidents do happen, so we sell just the VBT-125 post if you have damaged your post.
Check out part number VBT-125.
This fits the VBT-2 only.
If you have damaged any of the VBT-10 rod holders on it, replacement rod holders are available look up part# VBT-10.
How many rod holders does this come with?
It comes with 2 of our VBT-10 model rod holders.
|
