Knowledge Base:  
How many ACB-250 Brackets do I need per track?
Last Updated: 08/07/2019

You will need one bracket per set of mounting holes when you are planning to use downriggers or vertical trees on the Traxstech tracks with the ACB-250 brackets.

Depending on what size of a track you are trying to mount using our ACB-250 will determine how many sets you will need to purchase.

The following information will make it easy for you to determine how many Rail Mount Clamps you will need:

  • MT-6 ( 6 inch mounting track ) requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets
  • MT-12 ( 12 inch mounting track )requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets
  • MT-18 ( 18 inch mounting track ) requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets
  • MT-24 ( 24 inch mounting track ) requires 2 ACB-250 Brackets / 1 set of ACB-250 Brackets. Unless you are doing a down-rigger or 4 unit tree then you need 4 ACB-250 Brackets / 2 sets of ACB-250 Brackets.
  • MT-36 ( 36 inch mounting track )requires 3 ACB-250 Brackets / 2 sets of ACB-250 Brackets
  • MT-48 ( 48 inch mounting track ) requires 3 ACB-250 Brackets / 2 sets of ACB-250 Brackets
  • MT-60 ( 60 inch mounting track ) requires 5 ACB-250 Brackets / 3 sets of ACB-250 Brackets
  • MT-72 ( 72 inch mounting track ) requires 6 ACB-250 Brackets / 3 sets of ACB-250 Brackets

*** Note *** The longer the track the more it spreads out the weight and torque that may occur with heavier or multiple items on the track with the ACB-250 system. It also means you may not need to have the ACB-250 bracket at every mounting hole on the track.



Was this article helpful?

Comments: