Buy our conversion kit and add a piece of our 6" mounting track to the wall of the shanty or mount it on the floor over the ice hole.
It can be mounted on boat railing that is from 1-1/4" through 2" diameter tube and used while structure fishing or trolling.
How it works:
The adjustable arm with our RM-800 bracket fits on boats that have the rails that are from 1-1/4" through 2" diameter tube allowing you to index the arm into multiple different directions.
It comes with a 5' aluminum pole that your transducer is mounted to on the end.
The pole has a collar system on it that tightens up to the pole and can be adjusted up and down to the depth you need in the water.
It sets into the arm yolk and the collar locks into place with a dovetail system that slides in and locks it into place while you are trolling or moving.
We have a handle on the top of the pole that allows you to turn and adjust the transducer as needed.
The handle also keeps the transducer perfectly lined up so you will know what direction the transducer is always pointing.
We have another plunger assembly found on the side and in a trolling application it allows you to turn and adjust and there are holes in the collar assembly that will allow you to lock it into place if need be.
It will work with any transducer.
This setup allows you to use it on your boat in the spring, summer, fall and in the winter use it on your ice shanty for year-round functionality of your transducer.
It allows you to take your transducer from boat to boat, or on vacation with you as well.
We have multiple mount options to choose from as well. You can view all the mounting options here.
We also sell a conversion kit that changes the base to slide into a track system, you can see that here.
We have replacement parts as well if you happen to lose or damage any of your TM-1000 Parts. You can view all the replacement parts for it here.